Skip to main content

Flake Epoxy Flooring in Columbus, Ohio

The most popular garage floor we install. A full broadcast of decorative vinyl flakes locked between a tough base coat and a clear topcoat — textured, slip-resistant and easy to keep clean.

What Is a Flake Epoxy Floor?

A flake floor (also called a chip floor or broadcast floor) is a multi-layer coating system. After the concrete is diamond-ground, we apply a pigmented base coat and broadcast colored vinyl flakes into it while it's wet. We broadcast to full rejection, meaning the floor is covered until it can't hold any more flakes, so no bare base coat shows through.

Once the base cures, we scrape and vacuum off the loose flakes and seal everything under a clear, UV-stable topcoat. The flakes give the floor its texture and grip, hide dust and small imperfections in the concrete, and make it easy to touch up years later.

Flake floors are what most Columbus homeowners picture when they think of a coated garage, but they work just as well in basements, laundromats, shops, gyms and showrooms. We help you pick a flake blend and flake size that suit the space, from subtle grays and tans to bolder mixes with red, blue or black.

Key Benefits

  • Textured surface with better grip than a smooth coating
  • Hides dust, tire marks and minor concrete flaws
  • Dozens of flake color blends and sizes to choose from
  • Resists hot-tire pickup, oil, salt and common garage chemicals
  • Clear UV-stable topcoat helps prevent yellowing in sunlit garages
  • Easy to clean with a mop or squeegee

Recent Flake Floors

Floors installed by our crew around Columbus and Central Ohio.

Gray full-flake epoxy floor in a two-car garage in Columbus, Ohio
Gray flake garage floor with matching cove base
Red and gray flake epoxy garage floor
Blue flake epoxy garage floor
Commercial flake epoxy floor in a Columbus-area laundromat
Gray flake garage floor seen through an open garage door

Our Process

A proven, professional installation from prep to final walk-through.

1

Diamond Grind & Repair

We grind the slab to open the concrete so the coating can bond, then fill cracks, pits and control joints as needed.

2

Base Coat

A pigmented base coat is rolled on in a color that complements your flake blend.

3

Full Flake Broadcast

Flakes are broadcast into the wet base coat until the floor is fully covered, then scraped and vacuumed once cured.

4

Clear Topcoat

A clear topcoat seals the flakes in and sets the final texture. We'll tell you exactly when you can walk and drive on it.

Where It's Used

Residential Garages

One-, two- and three-car garages across Columbus, Dublin, Hilliard, Grove City and the rest of the metro.

Basements

A seamless, easy-to-clean floor for rec rooms, laundry rooms, gyms and storage areas.

Laundromats & Retail

High-traffic commercial floors that need to look clean, resist spills and hold up to carts and foot traffic.

Workshops & Auto Bays

Textured, chemical-resistant floors for home workshops, detailing bays and service shops.

Gyms & Locker Rooms

Grip and durability for training areas and wet spaces where a smooth coating would be slippery.

Porches & Three-Season Rooms

Covered outdoor concrete that needs a decorative, slip-resistant finish with a UV-stable topcoat.

Serving Columbus & Central Ohio

Based in Grove City, we install flake epoxy flooring throughout the greater Columbus metro — typically within a 20-mile radius.

Frequently Asked Questions

What's the difference between a flake floor and a regular epoxy floor?

A regular (solid-color) epoxy floor is a smooth, single-color coating. A flake floor adds a full layer of decorative vinyl flakes and a clear topcoat. That gives it texture for grip, a multi-color look that hides dirt and imperfections, and a thicker overall system. Most garage owners in Columbus choose flake for those reasons.

How much does a flake floor cost in Columbus?

Full-broadcast flake systems in the Columbus area typically run about $7–$11 per square foot installed, depending on the size of the space, the condition of the concrete and the coating chemistry. Smaller garages cost more per square foot than larger ones. Our epoxy floor cost guide breaks this down by garage size, and we give exact pricing after we see the slab.

Is a flake floor slippery when wet?

Flake floors have more texture than smooth coatings, so they offer better grip. Any coated floor can be slick with water, snow melt or oil on it, though. If you want extra traction, we can add an anti-slip additive to the topcoat.

Will a flake floor hold up to Ohio winters and road salt?

Yes. A properly installed flake system with a quality clear topcoat resists salt, snow melt and freeze-thaw much better than bare concrete or garage floor paint. The keys are good surface prep (diamond grinding, not acid etching) and a topcoat rated for hot tires and chemicals. Rinsing salt off during the winter helps the floor look its best.

Can you put a flake floor over my old epoxy or paint?

We grind off failing paint or coatings first so the new system bonds directly to sound concrete. Coating over a peeling floor is the most common reason DIY and budget jobs fail, so we don't skip that step.

Ready for a free, no-pressure quote?

Tell us about your project and we'll come measure, recommend the right system, and give you an honest estimate.